Diamond Crystal® GreenMelt® Ice Melter
Tinted for Application Efficiency
GreenMelt® ice melter is commercially balanced to give sidewalk and parking lot crews a critical 20-minute jump start from its Calcium Chloride, coupled with 60+ minutes of extended melting action from its Sodium Chloride.
- Works down to -5°F/-21°C
- Green-tinted for easy-to-see coverage on ice and packed snow
- An economical one-two punch of Calcium Chloride and Sodium Chloride for commercial applications
Directions for Use:
Remove slush and as much loose snow as possible before ice melter application. Spread GreenMelt® ice melter evenly across surface area. Apply ½ – 1½ cups per square yard, depending on ice thickness and air temperature, as needed. Reapply as necessary. When ice and snow soften, remove slush and any excess ice melter from pavement for good concrete maintenance.
Technical Informaiton
Description
This product is intended for use as an ice and snow removal agent and is a two component blend formulated to melt ice and snow faster than rock salt or potassium chloride based deicers.
Chemical Analysis
| Component | CAS Number | Typical |
|---|---|---|
| Sodium Chloride (dry) | 7647-14-5 | 95% |
| Calcium Chloride | 10043-52-4 | 5% |
| Green Colorant | Trace |
Methods of Analysis
Methods of analysis are based on ASTM E 534, SHRP H-205, Ice Melting Capacity Test and Cargill internal methods.
Producing Locations
This product is packaged at Cargill Salt: Pittsburgh, PA. Product of USA.
Storage information
- Contains calcium chloride, which can absorb water from the air. Close and reseal package tightly to keep product dry, or place in a moisture-proof container
- Store in a dry place
- Always store ice melters out of reach of children and pets